PYNEboard® RAW & LPM
PYNEboard® particleboard is available in many sizes and thicknesses from 9mm to 33mm (for the complete range of sheet sizes click here). The comprehensive range allows economic cutting of boards. PYNEboard is easy to work with normal woodworking tools as it has no grain direction so it is the same strength and appearance in all directions. The fine surface layers are also pre-sanded, ready for painting or laminating. PYNEboard is available in two grades, standard and moisture resistant substrates, making it ideal for cabinetry.
PYNEboard is also available surfaced with a white decorative paper.
Two finishes are available in PYNEboard white
- Velvet – a delicate eggshell surface
- Décor – a lightly dimpled texture
Features & Benefits
PYNEboard is available in two grades: standard and moisture resistant substrates. Where applications may be subjected to conditions of high relative humidity or occasional wetting, such as bathroom vanities and kitchen cupboards, PYNEboard MR should be used.
PYNEboard is produced to meet Australian Standard AS/NZS 1859.1:2004 - Particleboard, and is also independently tested and accredited by the The Engineered Wood Products Association of Australasia (EWPAA). You will find the relevant certificates in the technical notes section below.
Formaldehyde emission meets the E1 standard requirement of ≤1.5 mg/L when tested in accordance with Australian/New Zealand Standard AS/NZS 4266.16:2004 Method of test 16: Formaldehyde emission – Desiccator method.
E0 (E zero) PYNEboard (<0.5 mg/L) is also available (note: minimum order quantities may apply).
You will find the relevant certificates in the technical notes section below.
PYNEboard Sheet Sizes
PYNEboard is available in two grades: standard and moisture resistant substrates. Where applications may be subjected to conditions of high relative humidity or occasional wetting, such as bathroom vanities, and kitchen cupboards PYNEboard MR should be used.
PYNEboard E0 Fact Sheet
PYNEpanel Fact Sheet
PYNEboard White Fact Sheet